Online Catalog
Conditions Available
Warranties Available
1202129L1
by Adtran
EIA-232 Serial, 2 x RJ-45 , RJ-48C , Serial V.35 , RJ-48C DSX-1 - CCITT V.35 - 1.54Mbps
- Unspsc:
- 43222611
- Description:
- The TSU 120e is modular, full-featured T1/FT1 multiplexer designed to support a wide range of end-user applications.
Contact Info:
Phone
(817) 672-7657
Email
equipment@makttrans.com
General Information
- Brand Name
- Adtran
- Manufacturer
- Adtran
- Manufacturer Part Number
- 1202129L1
- Manufacturer Website Address
- http://www.adtran.com
- Product Model
- TSU 120e
- Product Name
- TSU 120e T1/Fractional T1 DSU
- Product Type
- CSU/DSU
Interfaces/Ports
- Network (RJ-45)
- Yes
- Serial Port
- Yes
- Serial V.35 Interface
- Yes
Miscellaneous
- Additional Information
- Network Interface: - Framing: D4(SF)/ESF, AT&T 54016 or ANSI T1.403 - DS0 Assignment: user selectable - T1 Transmit Timing: Network, Secondary NI, Normal (CSU), Internal, Base DSX-1 or Base DTEV.35 DTE Interface: - Clock Options: Normal/Inverted & Internal/ExternalDial BackUp: - Accessible on base V.35 DTE Port - Requires optional V.35 "Y" cable - DBU Dialing: DTR dialing - DBU Test: Loopback to DCE, Test dialup network, Force dial backupDSX-1 Interface: - Line Interface: DSX-1 per ANSI T1.102 - Physical Interface: RJ-48C, modular 8-pin - DSX-1 Framing: D4(SF)/ESF - DSX-1 Line Code: AMI/B8ZS - DSX-1 Line Length: 0 to 655 ft in 133 ft stepsTesting and Troubleshooting: - Local: Payload, Line, and DTE Loopback - Remote: - Payload, Line, and DTE Loopback - Fractional T1 Loopback: Per ANSI T1.403-1995, Annex B - CSU Loopback (from Carrier Network) - Test Pattern Generator and Detector: - QRSS and 511 (selectable DS0s) - All 0s and All 1s (transmit only) - Performance Monitoring: - Error Counts: ES, SES, UAS, % AS, % EFSEC, Alarms and Error Rates - Reports: NI information stored for last 24 hours (15-minute increments) - PRMS: ANSI performance report messages - Network & DSX-1 Interface Test Jacks: - Bantam Jacks: TX, RX and RXMONManagement Options and Interfaces: - Control In/Control Out Ports: - Interface: EIA-232, PC serial port, modem or SLIP connection to router - Physical Connector: RJ-45, modular 8-pin SNMP/Telnet - SLIP connection to router - MIB II, RFC1213, and 1407 compliant - ADTRAN Enterprise MIB for extended monitoring, 120e control/configuration and expansion module support - Service: SNMP, Telnet, ICMP, ARP, PING, T-Watch PRO
- Certifications & Standards
- UL 1950CULFCC Part 15 (Class A)FCC Part 68
- Package Contents
- One 6 ft. modular 8-pin to 8-pin cableModular-tofemale DB-25 adapterModular-to-female DB-15 adapterTwo 15 ft modular T1 cablesUser manual
Physical Characteristics
- Depth
- 12.5"
- Height
- 3.1"
- Weight (Approximate)
- 4 lb
- Width
- 8.5"
Power Description
- Input Voltage
- 115 V AC
- Maximum Power Consumption
- 9 W
Technical Information
- Encoding Method
- AMI/B8ZS